Description

• Broad color palette, RGBW color  mixing

• Eye-candy AuraEffects™ 

• Uniformshades 

• Built-in FXengine 

• 11 to 58°zoom 

• 3850 Lumensoutput 

• Rapidmovement 

• Compact, low weight design (5.6kg)

• Highefficiency, lowpowerconsumption, longlifetime

 

Physical

Length: 302 mm (11.9 in.) across yoke Width: 302 mm (11.9 in.) across yoke Height: 360 mm (14.2 in.), head straight up

Weight: 5.6 kg (12.4 lbs.) without accessories

Dynamic Effects

Beam color mixing: RGBW

Aura (secondary lens array illumination) color mixing: RGB Beam color temperature control: CTO, variable 10 000 – 2500 K

Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color

Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects

Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined

Electronic dimming: Independent beam and aura, four dimming curve options Pan: 540°

Tilt: 232°

Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming

Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)

Macro programs selectable via DMX: Synchronized beam and aura effects Control: DMX

RDM:  Implemented

Control resolution: 8-bit, with 16-bit control of pan & tilt DMX channels: 14/25

Setting and addressing: Control panel with backlit graphic display DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20 Transceiver: RS-485

Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

Optics

Zoom range: 11° – 58° One-tenth peak angle

Light source: 19x 10W RGBW LED Array System LED refresh rate: Beam 1220 Hz, Aura 4395 Hz

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer´s test conditions:

Photometric Data

Total output: 3850 lumens (zoom at maximum)

Construction

Color: Black

Housing: High-impact flame-retardant thermoplastic Protection rating: IP20

Installation

Mounting points: One M12 threaded hole for rigging clamp Location: Indoor use only, must be fastened to surfaceor structure Orientation:Any

Minimum distance to combustible materials: 100 mm (4.0 in.) Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

Connections

AC power input: Neutrik PowerCon

AC power throughput: Neutrik PowerCon DMX and RDM data in/out: 5-pin locking XLR

Electrical

AC power: 100-240 V nominal, 50/60 Hz Maximum total power consumption: 260 W

Power supply unit: Auto-ranging electronic switch mode Main fuse: 5 AT (slow blow)

Typical power consumption, all effects static, zero light output: <15 W

Typical Power and Current

100 V, 60 Hz: 236 W, 2.4 A, PF 0.994

120 V, 60 Hz: 234 W, 2.0 A, PF 0.992

208 V, 60 Hz: 229 W, 1.2 A, PF 0.970

230 V, 50 Hz: 228 W, 1.1 A, PF 0.959

240 V, 50 Hz: 228 W, 1.0 A, PF 0.953

MeasurementsmadeatnominalvoltagewithallLEDsatfullintensity.Allowfora deviationof+/-10%.:

Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 5° C (41° F) Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

Approvals

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471

EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547

US safety: UL 1573

US EMC: FCC Part 15 Class A

Canadian safety: CSA E598-2-17 (CSA E60598-1) Canadian EMC: ICES-003 Class A

Australia/NZ: C-TICK N4241