Description
Brightness
- 10,875 (ISO)
- 9,500 (ANSI)
Color wheel
- 4 Segment (RGBY) – 2X or 3X speed
Contrast (nominal)
- Full On/Off (Christie Real Black Enabled): 300,000:1
- Dynamic Contrast: 6,000:1
- Full On/Off (Christie Real Black Disabled): 1,200:1
- ANSI: 250:1
Display
- 1 x 0.67” DMD
Resolution
- 1920 x 1200 (2,304,000 pixels) 16:10
Illumination type
- Laser Phosphor with Christie BoldColor Technology
Illumination lifetime
- 20,000 hours
Signal inputs
Standard
- HDMI x 2 (One on rear panel, one on bottom of projector, independently selectable)
- 3GSDI x 1 (BNC)
- DVI-D x 1 (Digital only)
- HD15 x 1
- USB x 1 (Type B mini) – Display over USB
- USB x 1 (type A) – Image Viewer or WiFi Dongle (optional)
- HDBaseT (RJ45 x 1)
- RJ45 x 1 (ChristiePresenter over wired network connection)
3D
- HDMI 1.4, HDBaseT – Frame Packed, Top/Bottom, Side By Side
- Up to 120Hz output
- 3D Sync In (BNC) – for genlocking projectors
- 3D Sync Out (BNC) – for genlocking projectors or controlling emitter or polarizer
Signals
- HDTV formats VGA through to WUXGA (1920 x 1200)
- Horizontal and vertical scaling while maintaining aspect ratio, all inputs
Pixel clock
- 162MHz
Scan rates
- Horizontal: 15 kHz to 91 kHz
- Vertical: 24 Hz to 85 Hz
Signal outputs
- HDMI x 1
- 3GSDI x 1 (BNC)
Control & networking
- RS232 In
- Control via HDBaseT
- Ethernet (10/100) RJ45 with ChristieNET connectivity
- Built-in Backlit Keypad
- Wired Remote Control (3.5mm stereo) – Loop out available for daisy chaining
Accessories
Standard
- IR Remote w/ wired remote jack (wire not included)
- AC Line cords for projector
- Rear Input/Keypad Panel Cover
- User Manual
Optional
- QwikRig Rigging Frame
- Christie One Mount Plus
- One Mount Extender Rod
- One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod)
- Wireless Dongle
Lens mount
- Boresight adjustable
- Motorized horizontal and vertical lens offset
- Motorized zoom and focus adjustment
Lens options
- Lens 0.36, Ultra short throw lens, 700/850/1075-GS
- Lens 0.75-0.95 Zoom G/GS
- Lens 0.95-1.22 Zoom G/GS
- Lens Zoom HP G/GS 1.22-1.52 (All G & GS)
- Lens 1.52-2.89 Zoom G/GS
- Lens 2.9-5.50:1 Zoom G/GS
Lens offsets (max)
- +/- 50% Vertical
- +/- 15% Horizontal
Power requirements
Operating voltage
- Normal: 100-240 VAC @ 50/60 Hz (w/ 15A fuse)
Power consumption
- Normal Mode: 1070W
Operating current
- Normal Mode: 10A (100V-240V)
Audible Noise (typical 2x Wheel Speed)
- 32dB(A) Eco2 Mode
- 35dB(A) Normal Mode
Physical dimensions
(L x W x H)
(L x W x H)
- 19.2 x 22.2 x 7.6″
- 480 x 555 x 190mm w/o feet or lens
Physical weight
- 54.9 lb (24.9 kg) w/o lens
Shipping dimensions
(L x W x H)
(L x W x H)
- 24.07 x 30.4 x 14.9″
- 599 x 759 x 373mm
Shipping weight
- 69.9 lb (31.7 kg)
Operating environment
- 0 to 40° C (32 to 104° F), 0-2500 ft altitude
- 0 to 30° C (32 to 86° F), 5,000-10,000 ft altitude
- Humidity: 0 – 85% non-condensing
Regulatory
- Contact Christie for timing of certifications: UL/CSA/IEC 60950-1, FCC Class A, CE, FDA, CCC, KC, PSE, CU, SABS, BIS, VCCI, RCM, Ukr, TER, SASO
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, REACH, WEEE
Limited warranty
- 3 years parts and labor on the projector
- 3 years or 15,000 hours parts and labor on the illumination system*
- Contact an authorized Christie representative for full details of our limited warranty